Engine Oil Pressure Sensor Voltage Low
The engine oil pressure sensor is reporting a voltage below the normal range.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The oil pressure sensor should send a voltage of about 0.5 to 4.5 volts based on oil pressure but it's sending less than 0.5 volts, indicating low pressure or a problem with the sensor.
What the computer is actually seeing
The engine control module (ECM) reads volts from the oil pressure sensor. If it's below the expected threshold (0.5 volts), it triggers the code.
What a healthy reading looks like
Normal oil pressure should produce about 1.0 to 4.0 volts, varying with pressure. Below 0.5 volts indicates a fault or low pressure.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 1Check oil level: Make sure oil is at the proper level. Low oil can trigger this code.
- 2Inspect wiring: Look for frayed wires or poor connections to the oil pressure sensor. Repair as necessary.
- 3Test the sensor: Use a multimeter to check voltage output from the oil pressure sensor while the engine is running. It should show 1.0 to 4.0 volts. If not, replace the sensor.
- 4Check oil pressure: If the sensor checks out, use a manual oil pressure gauge to verify actual oil pressure. If it's low despite good readings, the oil pump may be failing.
Common causes
- Faulty oil pressure sensor
- Low engine oil level
- Wiring or connector issues to the sensor
- Faulty engine oil pump
Typical repair cost
$$$-$$$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's moderate severity; you should fix it soon to avoid engine damage.
Will this code come back after clearing it?
If the underlying issue isn't resolved, it will likely return.
Why does this code pair with low oil pressure readings?
Low voltage indicates the sensor isn't detecting proper pressure, which can stem from actual low pressure or sensor issues.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →